700W Off Grid Pure Sine Wave Power Inverter 12V 220V for Solar Panel PV System High Frequency Excellent EMC Design High Quality

shi600 inverters

Thanks for purchasing our company’s inverter of STI series. The product is a sine wave power frequency inverter which can convert 24V DC to 220V AC 50Hz based on full digital and intelligent design. It features high reliability, high efficiency, concise outline, small volume, full protection functions, easy installation and operation. The inverter can be applied in many fields especially for solar photovoltaic power system.

  • Complete isolation-type inverter technology, noiseless sine AC voltage of output
  • Adoption of advanced SPWM technology, pure sine wave output
  • Dynamic current loop control technology to ensure inverter reliable operation
  • Saving mode for selection
  • Wide DC input voltage range
  • Excellent EMC design
  • Low output harmonic distortion(THD≤3%)
  • LED indicators for input voltage range, load power range, normal output & failure state
  • Input polarities conversed, load short-circuit, overload, under/over input voltage and over-temperature protections and alarms, inverter’s inner fault protections
  • Fitted for many kinds of AC loads such as household appliances, electric tools and industrial devices
  • Wide working temperature range (industrial level)

 

 

Inverter Operation:

Connect the input and output terminals accurately by referring to the previous chapter. Use the ON / OFF switch on the front panel to turn the power on. Turn AC loads on one by one after the output of the inverter is normal, in order to prevent protections resulted from the surge power.

  • Set the power switch to the ‘OFF’ position.
  • Insert the load’s plug into the inverter’s output outlet, or cables to the output terminals.
  • Connect the battery (‘+’ terminal with red line, ‘-’with black line). Do not connect them by contraries, or it will damage the power inverter.
  • Switch the inverter to ON and then turn the loads on one by one. Check the operation state of both power inverter and loads. ‘Green’ of the LED indicator means the state is normal.
  • If there are different loads, it is suggested that turn on the load with large startup current first, such as television, then turn on the load such as lamp when the inverter works stable.
  • If the failure LED indicator is ‘Red’ and the buzzer alarms or no output when you turn on devices, switch off the loads and power inverter immediately. Check the system by referring to the troubleshooting guide. Turn on the devices again according to the operation methods after the failure is removed.

 

Panels:

 

Protections

Output Short Circuit Protection

The inverter switches off the output immediately when the connecting load is short. Then it recovers the output automatically after delaying 5 seconds for the first time, 10 seconds for the second time, and 15 seconds for the third time. If the short circuit status still remains when the inverter tries to recover for 3 times, you should clear the load faults then restart the inverter manually.

Overload Protection

When the load power is 1.25 times, 1.5times and 2 times more than the rated value, the inverter will switch off the output after working for 60 seconds, 10 seconds and 1.5 seconds, respectively. Once the load power is over 230% of rating, the inverter recognizes it as AC short circuit and auto-switches off the output. If the overload status still remains when the inverter tries to recover for 3 times, you should reduce the loads then restart the inverter manually.

Input Low Voltage Protection

The output is switched off when the input voltage is lower than 21 V, and the output is auto-switched on when the input voltage recovers to 26 V. User can also manually restart the inverter to switch on output by the ‘ON/OFF switch’, when the input voltage recovers to 21 V.

Input Over Voltage Protection

The output is switched off when the input voltage is higher than 32 V, also the output is auto-switched on when the input voltage drops to 30 V.

Fault Protection

The inverter will shut down when the output voltage is error or when the inverter has inner fault.

Over Temperature Protection

The inverter will shut down when the ambient temperature exceeds the normal level. And it will be back to work when the temperature recovers to the normal level.

Others

Saving Mode

Inverter will perform the ‘saving function’, if the saving mode switch is transferred to ‘saving’ side. It means that inverter shuts down the output provided the loads value is less than 20VA. It cycles as below: the output restarts after delaying 20 seconds, and the inverter decides to remain output when the load is more than 20VA or to shut down output again when the load is less than 20VA. It is recommended to disable the ‘saving function’ if your loads is less than 20VA.

 

DC Input

Input Rated Voltage

24V

Input Voltage Range

21 ~ 32VDC

No-Load Power

≤12W

AC Output

Output Voltage

AC 220V±3%

Rated Power

≥400W

Maximum Short Time Power

750VA; 10s

Surge Power

1000VA; 1.5s

Output Mode

Single phase

Output Waveform

Sine wave

Frequency

50±0.5% Hz

Output Waveform Distortion

THD≤ 3%

Efficiency at Rated Power

≥88%

Mechanical Parameters

Exterior(L*W*H mm)

324.5×186.6×111.8

Installation(L*W mm)

200×174.6

Hole Size(mm)

R4

Net weight (kg)

7.3

Environmental Parameters

Working Temperature

-20°C~+50°C

Storage Temperature

-35°C~ +70°C

Humidity

< 95%(N.C.)

Altitude

< 5000 m (Derating to operate according to IEC62040 at a height exceeding 1000 m)

Others

Insulation Resistance

Between DC input terminals and metal case: ≥550MΩ;

Between AC output terminals and metal case: ≥550MΩ.

Dielectric Strength

Between DC input terminals and metal case:

Test voltage AC1500V, 1 minute

Between AC output terminals and metal case:

Test voltage AC1500V, 1 minute

 

 

65IMG_3131

YSmart Technology Co.,Ltd is an energetic and technological innovative company, dedicated in researching, manufacturing and marketing solar related proudcts,the factory islocated in Shenzhen China.We provide products including PWM solar charge controller, MPPT solar controllers solar Lamps and Inverters.
The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.
Since 2009, our service has been expanded to all over world.Our products are widely used in Spain,United Kingdom,France,India,Italy,Australia and many other countries and regions ,and have been extensively applied and highly appraised in a number of major projects.
" Quality first, customer orientation " is our purpose. YSmart Technology will be committed to provide the best service to you!
 

1. WORLDWIDE SHIPPING.

2. Orders processed timely after the payment verification.

3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.

4. The images shown are not the actual item and are for your reference only.

5.Ordes processed within 24-48 hours of payment verification.

6. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.

7. If you have not received your shipment within 40 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

8. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.

 
1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.

2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po #.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product (s) is (are) not as advertised.

 

1. 12 months Manufacturer `s limited Warranty for defective items (excluding items damaged and / or misused after receipt). MPPT solar controllers come with 24 months warranty.

2. Defective items MUST BE reported and returned within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY .

You agree to all of the above-listed policies upon ordering on aliexpress!

 

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

It is impossible to address issues if we do not know about them!

Specifications
Input Voltage 12V
Output Voltage 220V
Output Power 700W

Write a review

Note: HTML is not translated!
    Bad           Good

700W Off Grid Pure Sine Wave Power Inverter 12V 220V for Solar Panel PV System High Frequency Excellent EMC Design High Quality

  • Brand: Inverter Expert
  • Product Code: 700W 12V 220V
  • Availability: In Stock
  • $205.30


Related Products

Off Grid Tie Power Inverter 12V 220V Pure Sine Wave 500w 50HZ EPever Low Output Harmonic Distortion Engery Saving Mode 2015 NEW

Off Grid Tie Power Inverter 12V 220V Pure Sine Wave 500w 50HZ EPever Low Output Harmonic Distortion Engery Saving Mode 2015 NEW

Off Grid Tie Power Inverter 12V 220V Pure Sine Wave 500w 50HZ EPever Low Output Harmonic Distortion ..

$205.30

Tags: 700W Off Grid Pure Sine Wave Power Inverter 12V 220V for Solar Panel PV System High Frequency Excellent EMC Design High Quality